Upgrade Set (For TAMIYA DT-04 only)

DT-04 Fighter NEXGEN Upgrade Set (Short LiPo only)

This complete parts set enhances chassis rigidity and optimizes weight distribution to unlock the structural potential of the DT-04.

In addition to improved turning ability due to the forward placement of the short battery , the use of fillers to fill gaps inside and outside the chassis physically improves pitching rigidity and bottom surface smoothness.

• Pitching rigidity improvement & forward load "Short Battery Holder"
  This is a dedicated holder that allows short LiPo batteries to be mounted further forward. By changing the battery's holding position, it increases the front load while simultaneously suppressing frame twisting and significantly improving vertical (pitching) rigidity. (Screw fixing)
• Road surface interference reduction "Under flat panel (4 points)"
  This fills in any unevenness or switch holes on the underside of the chassis, creating a completely flat (smooth) bottom surface. This not only reduces contact resistance with the road surface but also strengthens the chassis's rigidity from the bottom up when glued to it. (Gluing is recommended.)
• "Internal fillers (5 points)" to increase structural density
  These five parts fit snugly into the gaps around the battery compartment. By physically filling the chassis cavities, they increase structural density and improve overall rigidity. (Adhesive fixing recommended)

[Compatibility] TAMIYA DT-04 Fighter NEXGEN

[Contents]

• Short battery holder set
• Underflat panel set
• Complete set of internal filler parts

[Caution]

• *To maximize the benefits of increased rigidity, we recommend gluing each part to the chassis.
• *This product is designed exclusively for short LiPo batteries. Standard straight packs cannot be used.
• *The chassis, battery, and electronics shown in the photos are not included.
• *Product shape and specifications may change without notice due to product improvements.