Body Measurement Device

Body projection measurement gauge (for 1/10 scale touring cars)

Quickly and accurately measure the distance from the center of the front axle to the tip of the body. Simply place the chassis on the unit and the vehicle height will automatically be the same as when the tires are installed. Made with highly durable 3D printed resin, it will last a long time even under harsh circuit use.

Measurements are marked in 0.5 mm increments for easy reading (for Shinwa rulers)
- The slider fixing screw allows drilling holes in the body while maintaining the dimensions. - Compatible with almost all 1/10 scale electric touring cars. - Simple structure allows for disassembly for compact storage. - Compatible with a Shinwa 150 mm ruler ( sold separately).

[Product Details]

Compatible with: 1/10 scale electric touring car bodies/chassis

Product contents:

• Measurement base body set
• Movable slider set
  

【supplement】
・The Shinwa 150 mm ruler is not included. Please purchase it at a hardware store or online. ・As this is a 3D printed product, there may be individual differences in color and layer pattern.

[Product Introduction]
Quantifies the distance between the center of the axle and the tip of the body. Variable body mount post. Does not affect vehicles. Measurement → drilling can be completed in one action. Can also be used for measurement only.

[Notes]
*Measurement accuracy depends on the ruler you use. Please use one that is not bent or rubbed. *Measurements may not be accurate on vehicles with special low-down specifications or large diameter tires. *Product specifications and appearance may be subject to change without notice for improvement purposes.