ViFA
3D-Bonnet Support V4 For A800R
3D-Bonnet Support V4 For A800R
It replaces the fender support attached to the end of the suspension arm.
Do not use in combination, just use this one.
Because the point distance is shorter than when it is at the end of the suspension arm
It is designed not to impede the movement of the front chassis.
〔Features〕
- Supports the underside of today's extremely thin bonnets.
- Reliably absorbs downforce.
- Reduces deformation of the body while driving.
- Prevents the front fender from cracking.
- Fine adjustments can be made by adjusting the height of the screws.
〔detail〕
・Compatibility = AWESOMATIX / A800R
・Quantity = 1 piece
*If there are any parts that interfere, please cut them off using pliers or similar.
*The shape may change without notice for improvement purposes.
*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).
*The weight is a reference value and may vary depending on humidity and temperature.
*Please note that the lightweight type is very thin and vulnerable to impact and heat.
Materials
Materials
The resin used has the following characteristics:
Currently it is the third batch.
-Excellent toughness
・Shock resistance
- Bending resistance
-High safety for the human body
3rd lot: Breaking elongation value 911
Second lot: Breaking elongation value 238
First lot: Breaking elongation value 118
*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.
High temperatures and direct sunlight can cause deformation.