Skip to product information
1 of 3


3D-Bonnet Support For A800MMX / AWESOMATIX (1pc)

3D-Bonnet Support For A800MMX / AWESOMATIX (1pc)

Regular price ¥1,480 JPY
Regular price Sale price ¥1,480 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

3D printed front bonnet support.


- Supports the underside of today's extremely thin bonnets.

- Reliably absorbs downforce.

- Reduces deformation of the body while driving.

- Prevents the front fender from cracking.

- Fine adjustments can be made by adjusting the height of the screws.

- The shape of the part that comes into contact with the front bulkhead prevents damage to the main chassis.


・Compatible with: A800 MMX / AWESOMATIX

Weight: Approx. 4.1g/each

・Quantity = 1 piece

-Installation method: Fasten together on top of the bumper support.

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary depending on humidity and temperature.


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details