3D-Bonnet Support for MTC2/MUGEN (1 piece)

3D printed front bonnet support.

〔Features〕

- Supports the underside of today's extremely thin bonnets.

- Reliably absorbs downforce.

- Reduces deformation of the body while driving.

- Prevents the front fender from cracking.

- Fine adjustments can be made by adjusting the height of the screws.

- The shape of the part that comes into contact with the front bulkhead prevents damage to the main chassis.

-If you use it with MTC2R, you will need to remove 1 mm from the part that comes into contact with the bulkhead.

〔detail〕

・Compatibility: MTC2 / MUGEN

Weight: Approx. 3.5g per piece

・Quantity = 1 piece

-Installation method: Fasten together on top of the carbon bumper support.

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary depending on humidity and temperature.