Skip to product information
1 of 3


3D-Bonnet Support for IF14-2TE / INFINITY (1 piece)

3D-Bonnet Support for IF14-2TE / INFINITY (1 piece)

Regular price ¥1,480 JPY
Regular price Sale price ¥1,480 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

3D printed front bonnet support.


-It lightly contacts the top of the front damper stay , providing high rigidity .

- Supports the underside of today's extremely thin bonnets.

- Reliably absorbs downforce.

- Reduces deformation of the body while driving.

- Prevents the front fender from cracking.

- Fine adjustments can be made by adjusting the height of the screws.

- The shape of the part that comes into contact with the front bulkhead prevents damage to the main chassis.


It is designed to fit when the following parts are installed.

If you are using the Team Edition, it will fit just by installing the T261.

・T174 Aluminum Lower Bulkhead

・T312 aluminum upper bulkhead

-T326 USP2 graphite front shock tower

・T261 Graphite front body post support


・Compatible with: IF14-2TE / INFINITY

Weight: Approx. 3.5g per piece

・Quantity = 1 piece

-Installation method: Fasten together on top of the OP carbon bumper support.

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary depending on humidity and temperature.


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details