Skip to product information
1 of 2


3D-Front Bumper V2 for A800MMX / AWESOMATIX (1 piece)

3D-Front Bumper V2 for A800MMX / AWESOMATIX (1 piece)

Regular price ¥2,200 JPY
Regular price Sale price ¥2,200 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

About the 3D printed front bumper


  • Material : Choose from rubber-based or hard resin
  • Back : Available or not available
  • Design : The exterior shape is the same as the original bumper. It is designed to be thin, achieving a lower center of gravity.


  • Compatible models : A800MMX / AWESOMATIX
  • Quantity : 1 piece


  • If there are any interfering parts, please cut them off with pliers etc.
  • For improvement purposes, the shape may change without notice.
  • Please avoid using the product in direct sunlight or in high temperature environments (60 degrees).
  • Weight is a reference value and may vary by approximately 4% depending on humidity and temperature.
  • V2 is for advanced users. It is lighter but less impact resistant.
  • Non-flexible types may crack in a hard crash


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details