Skip to product information
1 of 1


3D-Front Bumper V2 Long for IF14-2 / ​​INFINITY (1 piece)

3D-Front Bumper V2 Long for IF14-2 / ​​INFINITY (1 piece)

Regular price ¥2,200 JPY
Regular price Sale price ¥2,200 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

This is a 3D printed front bumper.


- The thickness is significantly thinner, lowering the center of gravity.

-The body has been lengthened to fit with a forward projection of approximately 2 to 5 mm.

- By removing the 4mm thick collar under the bumper holder, it can be installed lower.

*Since the bumper holder will be lowered by 4mm, depending on the version of the 3D bonnet support you already have, you may not be able to use the support at the same time.


・Compatible with: IF14-2 series/INFINITY

・Quantity = 1 piece

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary by approximately 4% depending on humidity and temperature.

*V2 is designed for advanced users and is lightweight but has reduced impact resistance.


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details