Skip to product information
1 of 1


3D-Front Bumper V2 Long for BD Series/YOKOMO (1 piece)

3D-Front Bumper V2 Long for BD Series/YOKOMO (1 piece)

Regular price ¥2,200 JPY
Regular price Sale price ¥2,200 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

This is a 3D printed front bumper.


- Made of rubber material.

- The thickness has been significantly reduced, lowering the center of gravity.

-The tip of the exterior shape is approximately 5mm longer than the original bumper.

- Both sides are extended, increasing the bottom area and improving aerodynamics .

・Use the twister with the body protruding about 3 to 5 mm forward .


・Compatible with: BD series, MS1.0 /YOKOMO

・Quantity = 1 piece

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary by approximately 4% depending on humidity and temperature.

*V2 is designed for advanced users and is lightweight but has reduced impact resistance.


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details