Skip to product information
1 of 2


3D-Front Bumper for BD10FWD/YOKOMO (1 piece)

3D-Front Bumper for BD10FWD/YOKOMO (1 piece)

Regular price ¥2,200 JPY
Regular price Sale price ¥2,200 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

This is a 3D printed front bumper.


- Made of rubber-based material, it is flexible.

- Weights up to 40g can be installed inside the bumper.

- By increasing the weight forward of the front axle, a significant increase in traction can be expected.

-Same shape as the original bumper.

・Significantly more rigid than the original.


・Fits BD10 FWD

Weight: Approx. 18.5g per piece (same shape as B9-001F)


・Quantity = 1 piece

※Weights are not included

※Assembly instructions are not included.

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary by approximately 4% depending on humidity and temperature.

*Because the material is soft, please be careful not to overtighten the screws on the weight cover.


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details