Skip to product information
1 of 2


3D-Front Bumper for 420/420X/TA08/TA07MSX/TAMIYA (1 piece)

3D-Front Bumper for 420/420X/TA08/TA07MSX/TAMIYA (1 piece)

Regular price ¥2,200 JPY
Regular price Sale price ¥2,200 JPY
Sale Sold out
Tax included. Shipping calculated at checkout.

This is a 3D printed front bumper.


- Made of rubber-based material, it is flexible.

-The underside is flat, allowing for a slightly lower center of gravity.

- It has the same shock absorbing rigidity as the original bumper.

- Less likely to sag than the original bumper.

- The external shape is the same as the original bumper.

The thickness is the same as the original.


・Compatible with: 420/420X/TA07MSX

Weight: Approx. 10.8g per piece (same shape as SP-1650/51650/16274028)

・Quantity = 1 piece

*If there are any parts that interfere, please cut them off using pliers or similar.

*The shape may change without notice for improvement purposes.

*Please avoid using the product in direct sunlight or high temperature environments (60 degrees).

*The weight is a reference value and may vary by approximately 4% depending on humidity and temperature.

*When using with TA08, please change the lower bumper support to the 420 part that is left over when assembling the kit.


The resin used has the following characteristics:

Currently it is the third batch.

-Excellent toughness

・Shock resistance

- Bending resistance

-High safety for the human body

3rd lot: Breaking elongation value 911

Second lot: Breaking elongation value 238

First lot: Breaking elongation value 118

*Since it has low heat resistance, please use it in an ambient temperature of 60 degrees or below.

High temperatures and direct sunlight can cause deformation.

View full details